How to change spare wheel. The simple spare wheel change guild.

Changing your spare wheel on a car is an important part of car maintenance that ensures your safety on the road. Here are some tips to help you change your spare wheel safely and efficiently:

Key factors when doing a spare wheel change.

1. Find a safe and level location to change your tires. Make sure the car is turned off and in park, and engage the emergency brake.
2. Gather all the necessary tools and equipment before starting, including a jack, lug wrench, spare tire, and gloves.
3. Use the lug wrench to loosen the lug nuts on the tire you want to change. You don't need to remove them completely yet, just loosen them enough so you can easily turn them by hand.
4. Place the jack under the car's jacking point, which is typically marked with an arrow or notch on the frame of the car. Raise the car until the tire is off the ground.
5. Remove the lug nuts from the tire and take the tire off the car. Be sure to keep the lug nuts in a safe place so you don't lose them.
6. Install the spare tire onto the car's hub and tighten the lug nuts by hand. Once you've tightened them as much as you can, lower the car back down to the ground.
7. Use the lug wrench to tighten the lug nuts as much as you can. Be sure to tighten them in a star pattern so the wheel is secured evenly.
8. Finally, check the spare wheel pressure on the spare tire and adjust it if necessary. Be sure to replace the damaged tire as soon as possible and have it repaired or replaced by a professional if needed.

Remember, changing your spare wheel can be dangerous if not done correctly. Always follow safety guidelines and consult your car's owner's manual for specific instructions.